Diversity training in graduate school: An exploratory evaluation of the Safe Zone project.

How can psychologists and graduate students become more affirmative of lesbian, gay, bisexual, and transgender (LGBT) issues? Safe Zone is a diversity-training program to increase sensitivity toward, knowledge of, and advocacy for LGBT populations and issues that affect them. In this exploratory study, the implementation of Safe Zone is described within a school of professional psychology; its effectiveness was assessed by self-reported behavioral and attitudinal changes and from participant evaluations. Results were encouraging with regard to the goals of Safe Zone and its adaptation to institutions interested in improving relations with the LGBT community, but additional empirical studies are needed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effect of sampling density on the measurement of stream condition indicators in two lowland Australian streams

There is widespread application of indicators to the assessment of environmental condition of streams. These indicators are intended for use by managers in making various comparative and absolute assessments and often have a role in resource allocation and performance assessment. Therefore, the problem of formally defining confidence in the results is important but difficult because the sampling strategies used are commonly based on a compromise between the requirements of statistical rigour and the pragmatic issues of access and resources. It is rare to see this compromise explicitly considered and consequently there is seldom quantification of the uncertainty that could affect the confidence a manager has in an indicator. In this paper, we present a method for quantitatively assessing the tradeoffs between sampling density and uncertainty in meeting various monitoring objectives. Assessments using judgement‐based representative reaches are shown to be unreliable; instead a sampling approach is recommended based on the random selection of measuring sites. A detailed dataset was collected along two streams in Victoria, Australia, and the effect of sampling density was assessed by subsampling from this dataset with precision related to the number of sites assessed per reach length and the intensity of the sampling at each site. The sampling scheme to achieve a given precision is shown to depend on the monitoring objective. In particular, three objectives were considered: (1) making a baseline assessment of current condition; (2) change detection; and (3) detection of a critical threshold in condition. Change detection is shown to be more demanding than assessing baseline condition with additional sampling effort required to achieve the same precision. Sampling to detect a critical threshold depends on nominating acceptable values of Type I and II error and the size of the effect to be detected. Copyright © 2006 John Wiley & Sons, Ltd.     

Studies of elemental distributions within discrete coal macerals: Use of secondary ion mass spectrometry and X-ray photoelectron spectroscopy

Secondary ion mass spectrometry has been used to measure qualitatively the distributions of many trace and minor elements within some well-characterized coal macerals: vitrinite, fusinite and exinite. Complementary information was obtained by using X-ray photoelectron spectroscopy. Within the vitrinite specimens studied, a widely-dispersed largely inorganic aluminosilicate phase was identified, which contained a number of other trace elements. By contrast, within the organic-rich phase of this macerai, titanium was detected in a very even distribution; this suggests that some titanium may be bonded in an organic complex. The fusinite was shown to contain elevated concentrations of calcium, magnesium and fluorine, dispersed over a large portion of the maceral. The high fluorine content could be identified as an organo-fluoro compound using XPS. Exinite was found to contain lower concentrations of most elements, compared to other macerals. The organic composition of this maceral was significantly different from that of surrounding macerals; this could be seen from the enhanced emission of the C₂H₂-secondary ion and images of this ion thus clearly outlined the position of such macerals.     

Acrylonitrile-based copolymers: Synthesis,characterization, and formation of ultrafiltration membranes utilized for the immobilization of proteins

Various high molecular weight copolymers of acrylonitrile and a vinyl comonomer containing an aryl amine, a pyridine, or an aliphatic hydroxyl group were synthesized via slurry polymerization techniques so as to contain from 1 to 15 mol % functional comonomer. The comonomer content was quantitated by ultraviolet absorbance, base titration of acid polymer salts, and/or relative chemical reactivity with trichloro-s-triazine. Thin films were cast from copolymer solutions, coagulated into unsupported ultrafiltration membrances, and characterized with respect to both water permeability and pore size distribution. Analysis by size exclusion chromatography of the membrane permeate of a pool of dextran fractions yielded a continuous distribution curve for membrane pore size over the range 1.5 to 70 nm. The ultrafiltration membranes were used for protein immobilization after appropriate chemical activation. The three distinct types of functional copolymers gave comparable results for α-chymotrypsin, with protein weight loadings of 6–12% and 40–65% retention of enzymatic specific activity.     

Using Bandwidth-Space Partitioning to Improve Cell Coverage and Near-Far Unfair Access Problem in a Noise-Limited CDMA Cellular Network

This paper concerns CDMA cellular networks equipped with conventional matched filter receivers. For this type of cellular networks, two problems exist. One is the inverse relationship between the coverage and capacity, and the other one is the near-far unfair access problem. To resolve these two problems, a bandwidth-space partitioning technique is adopted. Several admission control schemes based on the bandwidth-space partitioning technique are proposed, and their performances are evaluated based on the simulation.Shih-Tsung Yang received his B.S. (1989) and M.S. (1991) degrees in electrical engineering from the National Taiwan University, and Ph.D. (1999) degree in electrical and computer engineering from University of Maryland, College Park.From 1999 to 2000, he was with SBC Technology Resourtces, Inc. where he was involved in the network architecture design for the ATM based networks. From November 2000 to May 2003, he was with Transilica/Microtune where he was involved in the design of Baseband and RF for the wireless communications. Since May 2003, Dr. Yang is now with Genesys Logic, Inc. where he is responsible for the baseband design of the WLAN and Ethernet.Dr. Yang’s research interests are in the area of Digital Communications, Communication networks and signal processing. E-mail: thomas.yang@genesyslogic.com.twAnthony Ephremides received his B.S. degree from the National Technical University of Athens (1967), and M.S. (1969) and Ph.D. (1971) degrees from Princeton University, all in Electrical Engineering. He has been at the University of Maryland since 1971, and currently holds a joint appointment as Professor in the Electrical Engineering Department and in the Institute of Systems Research (ISR) of which he is a founding member. He is co-founder of the NASA Center for Commercial Development of Space on Hybrid and Satellite Communications Networks established in 1991 at Maryland as an off-shoot of the ISR. He served as Co-Director of that Center from 1991 to 1994.He was a Visiting Professor in 1978 at the National Technical University in Athenas, Greece, and in 1979 at the EECS Department of the University of California, Berkeley, and at INRIA, France. During 1985-1986 he was on leave at MIT and ETH in Zurich, Switzerland. He was the General Chairman of the 1986 IEEE Conference on Decision and Control in Athens, Greece and of the 1991 IEEE International Symposium on Information Theory in Budapest, Hungary. He also organized two workshops on Information theory in 1984 (Hot Springs, VA) and in 1999 (Metsovo, Greece). He was the Technical Program Co-Chair of the IEEE INFOCOM in New York City in 1999 and of the IEEE International Symposium on Information theory in Sorrento, Italy in 2000. He has also been the Director of the Fairchild Scholars and Doctoral Fellows Program, an academic and research partnership program in Satellite Communications between Fairchild Industries and the University of Maryland. He won the IEEE Donald E. Fink Prize Paper Award (1992) and he was the first recipient of the Sigmobile Award of the ACM (Association of Computer Machinery) for contributions to wireless communications in 1997. He has been the President of the Information Theory Society of the IEEE (1987) and has served on its Board of Governors almost continuously from 1981 until the present. He was elected to the Board of Directors of the IEEE in 1989 and 1990. Dr. Ephremides has authored or co-authored over 100 technical journal papers and 300 technical conference presentations. He has also contributed chapters to several books and edited numerous special issues of scientific journals. He has also won awards from the Maryland Office of Technology Liaison for the commercialization of products and ideas stemming from his research. He has served on the Editorial Boards of the IEEE Transactions on Automatic Control, IEEE Transactions on Information theory, the Journal of Wireless Networks, and the International Journal of Satellite Communications.He has been the Dissertation Supervisor of over twenty Ph.D. students who now hold prominent positions in academia, industry, and research labs. He is the founder and President of Pontos, Inc., a Maryland company that provides technical consulting services, since 1980.Dr. Ephremides’ interests are in the areas of communication theory, communication systems and networks, queueing systems, signal processing, and satellite communications. His research has been continuously supported since 1971 by NSF, NASA, ONR, ARL, NRL, NSA, and Industry. E-mail: tony@eng.umd.edu     

A new FMS architecture based upon networked DSP servo technology

This paper presents a critical evaluation of existing FMS architectures and the academic and industrial design and development strategies used during their formulation. The paper seeks to address the need for, and value of, existing architectures within the industrial arena. More importantly however, this paper puts forward a new two-tier distributed control architecture for FMS based upon new (real-time) networkable DSP servo control methodologies developed by one of the authors for Softronics in Australia. The ramifications of these methodologies are substantial, not only in terms of FMS control, but in the overall simplification of such systems and the development of flexible fixturing devices over the coming decade. This paper also postulates on how new FMS architectures can be developed from such technologies and details why such architectures could be more appropriate to industry needs than those that are currently in existence.     

Measuring knowledge transfer between fields of science

In this paper we report on the results of an exploratory study of knowledge exchange between disciplines and subfields of science, based on bibliometric methods. The goal of this analysis is twofold. Firstly, we consider knowledge exchange between disciplines at a global level, by analysing cross-disciplinary citations in journal articles, based on the world publication output in 1999. Among others a central position of the Basic Life Sciences within the Life Sciences and of Physics within the Exact Sciences is shown. Limitations of analyses of interdisciplinary impact at the journal level are discussed. A second topic is a discussion of measures which may be used to quantify the rate of knowledge transfer between fields and the importance of work in a given field or for other disciplines. Two measures are applied, which appear to be proper indicators of impact of research on other fields. These indicators of interdisciplinary impact may be applied at other institutional levels as well. This revised version was published online in August 2006 with corrections to the Cover Date.     

A 3D contact smoothing method using Gregory patches

In this work, a method is developed for smoothing three‐dimensional contact surfaces. The method can be applied to both regular and irregular meshes. The algorithm employs Gregory patches to interpolate finite element nodes and provide tangent plane continuity between adjacent patches. The resulting surface interpolation is used to calculate gaps and contact forces, in a variationally consistent way, such that contact forces due to normal and frictional contact vary smoothly as slave nodes transition from one patch to the next. This eliminates the ‘chatter’ which typically occurs in a standard contact algorithm when a slave node is situated near a master facet edge. The elimination of this chatter provides a significant improvement in convergence behaviour, which is illustrated by a number of numerical examples. Furthermore, smoothed surfaces also provide a more accurate representation of the actual surface, such that resulting stresses and forces can be more accurately computed with coarse meshes in many problems. This fact is also demonstrated by the numerical examples. Published in 2002 by John Wiley & Sons, Ltd.